<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<P3Model xmlns="p3.martin.com" ManufacturerId="19792" SeriesId="02" ProductId="03" RDMDeviceModelID="178" ArtNetOEMCode="11538">
    <Name>P3 PowerPort 500 IP Rental</Name>
    <ShortName>P3 PowerPort 500 IP Rental</ShortName>
    <RangeName>P3</RangeName>
    <SeriesName>P3 PowerPort Series</SeriesName>
    <Category>Bridge</Category>
    <Checksum>fda23b1f 43d3c5d7 12f98fbd 62980dee 726e3dd0</Checksum>

    <PhysicalProperties>
        <Dimensions>
            <HorizontalPixels>0</HorizontalPixels>
            <VerticalPixels>0</VerticalPixels>
            <HorizontalPixelPitch>0</HorizontalPixelPitch>
            <VerticalPixelPitch>0</VerticalPixelPitch>
        </Dimensions>

        <MaxAmbientTemperature>90</MaxAmbientTemperature>
        <DefaultThermalThrottlingStart>80</DefaultThermalThrottlingStart>

        <ColourDepth>16</ColourDepth>

        <EthernetPorts>
            <EthernetPort Speed="1000"/>
            <EthernetPort Speed="1000"/>
            <EthernetPort Speed="100"/>
        </EthernetPorts>
    </PhysicalProperties>

    <ConfigurationOptions>
        <TestPatternControl FeatureId="4" NoneValue="0" WhiteValue="1" RedValue="2" GreenValue="3" BlueValue="4" OutlineValue="0" IntensityFeatureId="5"/>
        <OutputControl>
            <Output Id="1" EnableFeatureId="8"/>
        </OutputControl>

        <Feature FeatureName="Fixture ID" FeatureId="00" FeatureType="Range">
            <EncodeBytes>2</EncodeBytes>
            <Access>ReadWrite</Access>
            <Range>
                <RangeMin>1</RangeMin>
                <RangeMax>65535</RangeMax>
                <EncodeMin>1</EncodeMin>
                <EncodeMax>65535</EncodeMax>
            </Range>
            <DefaultValue>1</DefaultValue>
        </Feature>

        <Feature FeatureName="Serial Number" FeatureId="01" FeatureType="Label">
            <EncodeBytes>32</EncodeBytes>
            <Access>ReadOnly</Access>
        </Feature>

        <Feature FeatureName="Firmware Version" FeatureId="02" FeatureType="Version">
            <EncodeBytes>4</EncodeBytes>
            <Access>ReadOnly</Access>
        </Feature>

        <Feature FeatureName="Status LED" FeatureId="03" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="On"/>
                <Enum EnumVal="1" EnumLabel="AutoOff 2min"/>
                <Enum EnumVal="2" EnumLabel="AutoOff 5min"/>
                <Enum EnumVal="3" EnumLabel="AutoOff 10min"/>
                <Enum EnumVal="4" EnumLabel="Off"/>
            </EnumMap>
            <DefaultValue>1</DefaultValue>
        </Feature>

        <Feature FeatureName="TestPattern Selection" FeatureId="04" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="[None]"/>
                <Enum EnumVal="1" EnumLabel="Full White"/>
                <Enum EnumVal="2" EnumLabel="Full Red"/>
                <Enum EnumVal="3" EnumLabel="Full Green"/>
                <Enum EnumVal="4" EnumLabel="Full Blue"/>
                <Enum EnumVal="5" EnumLabel="Mixed White"/>
            </EnumMap>
            <DefaultValue>0</DefaultValue>
        </Feature>

        <Feature FeatureName="TestPattern Intensity" FeatureId="05" FeatureType="Range">
            <Unit>%</Unit>
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <Range>
                <RangeMin>0</RangeMin>
                <RangeMax>100</RangeMax>
                <EncodeMin>0</EncodeMin>
                <EncodeMax>255</EncodeMax>
            </Range>
            <DefaultValue>255</DefaultValue>
        </Feature>

        <Feature FeatureName="Identify" FeatureId="06" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="Off"/>
                <Enum EnumVal="1" EnumLabel="On"/>
            </EnumMap>
            <DefaultValue>0</DefaultValue>
        </Feature>

        <Feature FeatureName="Power Limit" FeatureId="07" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadOnly</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="Half Power"/>
                <Enum EnumVal="2" EnumLabel="Full Power"/>
                <Enum EnumVal="3" EnumLabel="Controller"/>
            </EnumMap>
        </Feature>

	    <Feature FeatureName="Output Enable" FeatureId="08" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="Off"/>
                <Enum EnumVal="1" EnumLabel="On"/>
            </EnumMap>
            <DefaultValue>1</DefaultValue>
        </Feature>

        <Feature FeatureName="Hibernation" FeatureId="12" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="Disable"/>
                <Enum EnumVal="1" EnumLabel="Enable"/>
            </EnumMap>
            <DefaultValue>0</DefaultValue>
        </Feature>

        <Feature FeatureName="Reset IP Settings" FeatureId="13" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="Off"/>
                <Enum EnumVal="1" EnumLabel="Reset"/>
            </EnumMap>
            <DefaultValue>0</DefaultValue>
        </Feature>

        <Feature FeatureName="IP Address" FeatureId="14" FeatureType="IpAddress">
            <EncodeBytes>4</EncodeBytes>
            <Access>ReadWrite</Access>
        </Feature>

        <Feature FeatureName="Subnet Mask" FeatureId="15" FeatureType="SubnetMask">
            <EncodeBytes>4</EncodeBytes>
            <Access>ReadWrite</Access>
        </Feature>

        <Feature FeatureName="Factory Defaults" FeatureId="17" FeatureType="Discrete">
            <EncodeBytes>1</EncodeBytes>
            <Access>ReadWrite</Access>
            <EnumMap>
                <Enum EnumVal="0" EnumLabel="Off"/>
                <Enum EnumVal="1" EnumLabel="Load"/>
            </EnumMap>
            <DefaultValue>0</DefaultValue>
        </Feature>

        <Feature FeatureName="Device Hours Total" FeatureId="18" FeatureType="Range">
            <Unit>hrs</Unit>
            <EncodeBytes>4</EncodeBytes>
            <Access>ReadOnly</Access>
            <Range>
                <RangeMin>0</RangeMin>
                <RangeMax>4294967295</RangeMax>
                <EncodeMin>0</EncodeMin>
                <EncodeMax>4294967295</EncodeMax>
            </Range>
        </Feature>

        <Feature FeatureName="Power Cycles Total" FeatureId="19" FeatureType="Range">
            <EncodeBytes>4</EncodeBytes>
            <Access>ReadOnly</Access>
            <Range>
                <RangeMin>0</RangeMin>
                <RangeMax>4294967295</RangeMax>
                <EncodeMin>0</EncodeMin>
                <EncodeMax>4294967295</EncodeMax>
            </Range>
        </Feature>

        <Feature FeatureName="RDM UID" FeatureId="20" FeatureType="Label">
            <EncodeBytes>32</EncodeBytes>
            <Access>ReadOnly</Access>
        </Feature>
    </ConfigurationOptions>

    <ActionDefinition>
    </ActionDefinition>

    <UserNotes>
        None
    </UserNotes>

    <KnownIssues>
        None
    </KnownIssues>

    <RevisionHistory>
        <Revision RevisionNum="1" Date="04 Apr 2025" Author="WVE">Initial MartinFixture Version</Revision>
        <Revision RevisionNum="2" Date="19 Nov 2025" Author="WVE">Removed Fixture ID</Revision>
    </RevisionHistory>
</P3Model>