Product Name: N-Series N2300 Video Encoder/Decoder
FG #: FGN2312-SA
      FGN2322-SA

Version: 01.01.15
Release Date: 6/5/2018

----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------

- None

----------------------------------------------------------
2. Revision History
----------------------------------------------------------
Version 01.01.15
 Improve VGA/HDMI startup time
 Implement option to give VGA or HDMI input priority
 Add Identify button to web page that displays IP address on decoder

Version 01.01.14
 Improve KVM connection recovery on reboot.
 Change audio stream ttl to default to 64
 Implement KVM retry
 Make analog audio startup delay optional
 Add optional encoder reboot on audio input failure

Version 01.01.05
  Fix issue with uploading odd host/local play images
  Fix issue with debug log startup
  Fix issue with KVM reconnecting on encoder or decoder restart
  Improved button feedback on webpages
  Treat stream 0 as a stream instead of as a local play command
  Add HDCP connection status to the decoder 
  Resolved audio stream compatibilty issues with other N-Series units
  Fixed audio multicast address calculation
  Add option to blank video during switch
  Don't issue NAct plug events on bootup
  Improved audio networking to avoid audio pops when video rate goes up
  Delay audio startup to avoid audio artifact after stream switch
  Add option to disable video genlock which causes some monitors to stutter the audio
  Improve decoder robustness 

Version 00.04.22
  Fix audio multicast address for non-interleaved mode

Version 00.04.21
  Fix 32K and 44.1K audio issue that occurred with selected monitors
  Default output to RGB to avoid the green screen
  Default KVM to on to match spec

Version 00.04.20
  Fix audio pop on decoder analog audio output
  Add 1920x1200 to EDID (requires reloading default EDID).
  Add latest netlinx support and add netlinx version to the webpage

Version 00.04.15
  Fix audio stutter issue
  Add control for video genlock
  Fix issue with audio channel count change crashing encoder.
  Fix issue with log overflowing on debug start
  Add support for DNS

Version 00.04.11
  Provide sync override feature for monitors that are sensitive to clock changes.
  Fixed decoder issue caused by selecting stream 0.  Now is the same as localPlay.
  Fix IR upload for N2300 devices

Version 00.04.08
  Fix loss of I-Frame requests on encoder stream restart

Version 00.04.04  
  Add commands for output volume up/down 
  Support secure ports only mode
  Clean up xml status file
  Improve encoder HDCP robustness
  Add line input volume control  
  Fix decoder reboot on stream switch
  Suport RGB 4K resolution mode
  Block unknown multicast streams from the swtich
  Support Harman serial number format
  Fix network lockup when switching into DHCP mode
  Improved Netlinx support
  Improved decoder stability

----------------------------------------------------------
3. Known Issues
----------------------------------------------------------

 On soft reboot, some devices lose KVM connectivity and require a hard decoder reboot
 If DHCP is first enabled on a network without a DHCP server, the unit reboots and the 
  setting is lost.  If the unit is running DHCP but is rebooted on a network without a 
  DHCP server, it falls back to autoip correctly.
