# /etc/inittab
#
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
#
# Note: BusyBox init doesn't support runlevels.  The runlevels field is
# completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id        == tty to run on, or empty for /dev/console
# runlevels == ignored
# action    == one of sysinit, respawn, askfirst, wait, and once
# process   == program to run

# Startup the system
null::sysinit:/bin/mount -t proc proc /proc 2>/dev/null
null::sysinit:/bin/mount -t tmpdevfs none /dev 2>/dev/null
null::sysinit:/bin/mount -o remount,rw /
null::sysinit:/bin/mkdir -p /dev/pts 2>/dev/null
null::sysinit:/bin/mount -a
#null::sysinit:/bin/hostname -F /etc/hostname

# now run any rc scripts
null::sysinit:/etc/init.d/rcS

null::once:/etc/init.d/network start

null::respawn:/usr/sbin/hostapdproxy /etc/hostapd/hostapd.conf
null::respawn:/usr/sbin/udhcpdproxy -f /etc/udhcpd.conf
null::respawn:/usr/sbin/telnetd -F
#null::respawn:/usr/sbin/tinyftp -c /
null::respawn:/usr/sbin/fdns 10 10 1 1

# ifplug for eth0
null::respawn:/usr/sbin/ifplugd -i eth0 -q -f -u0 -d10 -W -I

# Start mixer
ttyS0::respawn:/etc/init.d/startup

# Set up a couple of getty's
#tty1::respawn:/sbin/getty 38400 tty1
#tty2::respawn:/sbin/getty 38400 tty2

# Put a getty on the serial port
ttyS0::respawn:/sbin/getty -n -l/bin/login -L ttyS0 115200 xterm # GENERIC_SERIAL

# Logging junk
#null::sysinit:/bin/touch /var/log/messages
#null::respawn:/sbin/syslogd -n -m 0
#null::respawn:/sbin/klogd -n
#tty3::respawn:/usr/bin/tail -f /var/log/messages

# Stuff to do for the 3-finger salute
::ctrlaltdel:/sbin/reboot

# Stuff to do before rebooting
#null::shutdown:/usr/bin/killall klogd
#null::shutdown:/usr/bin/killall syslogd
null::shutdown:/bin/sync
null::shutdown:/etc/init.d/network stop
null::shutdown:/bin/mount -o remount,ro /
null::shutdown:/bin/umount -a -r
#null::shutdown:/sbin/swapoff -a

