Release Notes

DXLink Fiber Transmitter Firmware (Enova DGX 100 Series
Compatible)

!!This firmware version requires Enova DGX 100 Series 
compatibility on connected Enova DGX systems!!

!!!Please reference the Enova DGX Board and Endpoint 
Compatibility Instructions on the AMX.com product 
page for more information!!!

FG#: 
  FG1010-360 (DXF-TX-SMD, DXLink Transmitter, HDMI, SM Fiber, Duplex)
  FG1010-361 (DXF-TX-SMS, DXLink Transmitter, HDMI, SM Fiber, Simplex)
  FG1010-362 (DXF-TX-MMD, DXLink Transmitter, HDMI, MM Fiber, Duplex)
  FG1010-363 (DXF-TX-MMS, DXLink Transmitter, HDMI, MM Fiber, Simplex)

Release Date: 12/28/2015
Current Released Firmware: v1.4.10
SW1010_36x_AVB_FW_v1_4_10.kit

----------------------------------------------------------
Table of Contents
----------------------------------------------------------

1. Prerequisites
2. Features added in this release
3. Fixes in this release:
4. Notable Points
5. Programming Information

----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------
- DXF-RX-xxD v1.4.11 (or later) to support standalone 
  behavior.

- Enova DGX DXLink I/O boards must be upgraded to the latest
  firmware versions (as provided in the DGX kit file listed
  below).

- Enova DGX 100 Series enclosures need Enova DGX
  800/1600/3200/6400 FW v3.0.x (or later) and Master FW:

    - SW1060_Master_v1.3.110 (or later)

- Enova DGX 8/16/32/64 enclosures need Enova DGX 8/16/32/64
  FW v2.2.7 (or later) and Master FW:

    - SW1056_Master_v4_2_395.KIT (NI-Series) Shows in Online
      Tree as "NI Master"

    - SW2106_NX-X200_Master_v1_3_110.kit (NX-Series) Shows
      in Online Tree as "DGX Master"

- NetLinx Studio v4.3.1519 or later

- DGX Configuration Software v1.0.6 or later


----------------------------------------------------------
2. Features added in this feature release:
----------------------------------------------------------

-Enova DGX 100 Series Functionality
- Auto Setup
- Control from WebGui


----------------------------------------------------------
3. Fixes in this patch release: 
----------------------------------------------------------

-Resolve issue with IRL file loading
-Resolve issue with RMS upgrade timeout
-Resolve issue with RMS Enova DGX dependencies

----------------------------------------------------------
4. Notable Points
----------------------------------------------------------

- Please read the documentation in regard to the DIP
  switches located on the bottom of the Tx/Rx modules
  before attempting to connect to the network.

- The TX module uses these solid color screen indications:
  RED
    Indicates an HDCP authentication failure with
    the HDMI sink (monitor or other device) connected to the
    local output.

----------------------------------------------------------
5. Programming Information
----------------------------------------------------------

- DXLink Fiber Transmitter Firmware (Enova DGX 100 Series
  Compatible)

- !!This firmware version requires Enova DGX 100 Series 
  compatibility on connected Enova DGX systems!!

- !!!Please reference the Enova DGX Board and Endpoint 
  Compatibility Instructions on the AMX.com product 
  page for more information!!!

