Release Notes

SDX Solecis Digital Switchers

FG#:   
  FG1010-315 (SDX-510M-DX, 5-input Transmitter Module)
  FG1010-304 (SDX-410-DX,  4-Input Transmitter Module)
  FG1010-308 (SDX-810-DX,  8-Input Transmitter Module)
 
Solecis Digital Switcher Firmware: v1.4.9
Release Date: 11/2/2015

README.TXT File Contents

1. Prerequisites
2. Features added in this release
3. Fixes in this release:
4. Known Issues
5. Programming Information
6. Notable Points


----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------

- For directly connected DXLink Receivers, the DXLink Receiver must use DXLINK-HDMI-RX firmware version 
  v1.9.21 (or later).

- For connecting to Enova DGX enclosures over DXLink, the Enova DGX will need the following FW versions:
    - For Enova DGXs with NX Masters: Enova DGX NX Master FW v1.2.312 (or later)
    - For Enova DGXs with NI Masters: Enova DGX 8/16/32 NI Master FW v4.2.395 (or later)
    - Enova DGX 8/16/32/64 FW  v2.0.0.12  (or later)

- Enova DVX 3x55 and 2x55 version enclosures will need DVX-3x5x/2x5x Switcher Firmware v1.6.31  (or later)
   

- To allow communication/control from the DVX2x55 or DVX3x55 to the DXLink TX device, Ethernet on 
  the DXLink Input(s) may need to be enabled. A DXLINK_IN_ETH-AUTO command may need to be sent to the DVX.  
  Reference the DVX Operation Reference Guide for details.

- NetLinx Studio NetLinx Studio V3.4 (4.0 if using NX master)

----------------------------------------------------------
2. Features added in this release:
----------------------------------------------------------
== Previously released in v1.4.4 ==========================
- DIP4 for setting DIRECT mode

----------------------------------------------------------
3. Fixes in this release: 
----------------------------------------------------------
Fixed audio and video details synchronization issues.
Force to auto-setup button now works correctly.

== Previously released in v1.4.4 ==========================
- case insensitive arguments for EXTERNAL_BUTTON_ACTION


----------------------------------------------------------
4. Known Issues
----------------------------------------------------------
None

----------------------------------------------------------
5. Programming Information
----------------------------------------------------------
None
    
----------------------------------------------------------
6. Notable Points
----------------------------------------------------------
- PLEASE READ the documentation in regard to the DIP switches located on the Solecis Digital Switcher
before attempting to connect to the network 
