Release Notes

MVP-5200i - 5.2" Modero ViewPoint Touch Panel with Intercom
MVP-5150  - 5.2" Modero ViewPoint Touch Panel

FG #: 	FG5966-01 (MVP-5200i-GB, Gloss Black)
	FG5966-02 (MVP-5200i-GW, Gloss White)
	FG5966-03 (MVP-5200i-GB, Gloss Black)
	FG5966-04 (MVP-5200i-GW, Gloss White)
	FG5966-07 (MVP-5150-GB, Gloss Black)
	FG5966-09 (MVP-5150-GB, Gloss Black)

Current Firmware Version: 2.87.13
Release Date: 1/23/12

Device ID: x0149


Prerequisites - The panel must be installed with v2.66.21 or greater before upgrading


Changes in this release
-----------------------
-- Added support for the detroit screen replacement
-- Added international fonts and gesture support
-- Minor bug fixes

Known Issues
----------------------------------------------------------
-- The time it takes from cold boot to when the panel displays its first page has 
   significantly increased compared to version v2.66.33 (pre-International Fonts feature). 
   The panel is still loading resources after the first page is displayed further
   increasing the time for the panel to react to the first button press.
-- Some 16 bit .wav files will not play properly.
-- Some fonts with incorrect or missing cmaps will not render the same on the
   on the panel as in TPD4.
-- Some large projects that used most of the available RAM will no longer load due
   to a decrease in available RAM to support the new font rendering engine.  This
   typically results in the panel jumping to the setup pages but sometimes results
   in a black screen.
-- Some buttons with active touch will see the button respond to touches in the
   inactive area.
-- Function Show does not show on all buttons.
-- Panel will establish a connection to the master when the Master Port Number is 0.
-- Panel will sometimes connect to the master but display "Attempting via Ethernet"
   on the setup pages.
-- Transitioning out of Standby mode can take up to 45 seconds.
-- Panel will not connect using Dynamic WEP in Enterprise Mode.
-- Site Survey can be intermittantly sluggish.  This is corrected with a panel reboot.
-- WiFi channel reporting is incorrect on setup pages when the radio is set to France
   or Spain mode.
-- If the panel goes into a low battery shutdown mode while in Standby, the Sleep
   setting reverts to the minimum value.


Programming Information
----------------------------------------------------------
-- None

