Release Notes

5.1" Modero ViewPoint Wireless Touch Panel

FG#: FG5966-08 (MVP-5100)
     

Current Firmware Version: 2.66.32
Release Date: 06/07/10

Device Id: 0x14D (MVP-5100)


Prerequisites: v2.66.21, v2.66.22, or later hotfixes must be installed


Changes in this release since version 2.66.21
---------------------------------------------
-- Fixed a NAND memory management problem where single memory bit errors were 
   not being corrected before being copied into RAM.
-- Fixed a NAND memory management problem where blocks that went bad were not being
   marked and skipped when upgrading firmware.
-- Fixed the upgrade process when a corrupt or incomplete kit file was sent to the panel
   and was upgraded to the NAND memory. The corrupt or incomplete kit files are now
   removed from the system upon reboot.
-- Added a popup indicating failed firmware upgrade attempts.
-- Fixed a race condition in which the panel hangs on boot logo on reboot/power on.
-- Fixed a fault in which the panel is unresponsive after entering sleep/backlight off.
-- Changed battery fault condition to an invalid battery id ONLY!
-- Added info button to audio setup page to describe Battery Type field.
-- Fixed the way the number of panel ports/channels/levels are reported to the
   master to reduce the amount of memory required by the master to
   maintain states.

Known Issues
------------
-- Disable Timeout on external Power gets disabled after each reboot.
-- Only MVP8400 style power management is implemented.  
-- Touch screen must be held until AMX logo displays to wake on touch
-- Keyboard/keypad button visual feedback may be not display for quick touches
 


Programming Information
-----------------------
No programming changes in this release.


