Release Notes

NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom

FG #: 	FG2261-02
	FG2261-03
	FG2261-04
	FG2261-05
	FG2261-06
	FG2261-07
	FG2261-08
	FG2261-09
	FG2261-12

Current Firmware Version: 2.86.5
Release Date: 11/07/2011

Device Id: x014B


Prerequisites: v2.4.28 or later must be installed before upgrading


Changes in this release
-----------------------
-- Resolved a memory leak issue that could potentially affect the responsiveness of 
   the touch panel, and in some extreme cases cause the touch panel to become unresponsive.

Known Issues
----------------------------------------------------------
-- The time it takes from cold boot to when the panel displays its first page has 
   significantly increased compared to version v2.4.28 (pre-International Fonts feature). 
   The panel is still loading resources after the first page is displayed further
   increasing the time for the panel to react to the first button press.
-- Some 16 bit .wav files will not play properly.
-- Some fonts with incorrect or missing cmaps will not render the same on the
   panel as in TPD4.
-- Some large projects that used most of the available RAM will no longer load due
   to a decrease in available RAM to support the new font rendering engine.  This
   typically results in the panel jumping to the setup pages but sometimes results
   in a black screen.
-- Some buttons with active touch will see the button respond to touches in the
   inactive area.
-- Function Show does not show on all buttons.
-- Panel will establish a connection to the master when the Master Port Number is 0.
-- Panel will sometimes connect to the master but display "Attempting via Ethernet"
   on the setup pages.

Programming Information
----------------------------------------------------------
-- None

