Home > Device Help Files > AKG > AKG HUB4000Q > Firmware Update

Firmware update - HUB4000 Q

With the Firmware Update the software (firmware) of AKG hardware devices can be updated within System Architect.

Following AKG devices can be updated with the Firmware Update:

• DSR700 V1/V2
• SST4/4500
  

Figure: Firmware Update of AKG Devices

• • Device Grid:

  • • Name: Name of the AKG Device.

    • Type: AKG Device type e.g. DSR700, SR4000/4500, SST4/4500  (can’t be changed within the Device Grid).

    • Locate Button: Locate Button with which the AKG Device can be located. If the AKG Device is located then the Button is labeled with 'LOCATING' and has a green background.

    • Current Version: Current firmware version of the AKG Device

• Available Version: Available firmware version of the AKG Device. This is the firmware version which will be used to update the AKG Device firmware.

• 1. • Update Checkbox: If checked this AKG Device firmware will be updated once the Start Update button is pressed.

  1. • Status: Shows the status of the update process.

  • Cancel Button: Closes the firmware update panel and cancel the firmware update process
    
    ATTENTION: this can make the AKG Device unusable! It is not suggested to cancel the update process.

  • Start Update Button: If pressed the firmware update is started for all AKG Devices where the Update Checkbox is checked.