For the DHT/DPT700 V1/V2 the Programmer Guide checks the frequency the user has set and proofs the RF connection. The user gets feedback if the settings were corrected and the RF connection is OK.
Figure: Default Programmer Guide page of DHT/DPT700 V1/V2 (DMS700 V1/V2)
Frequency Label: Shows the RF frequency the DHT/DPT700 V1/V2 should be programmed with.
Frequency Band Label: Shows the Frequency Band of the DHT/DPT700 V1/V2.
Name Label: Shows the name of the DHT/DPT700 V1/V2.
AF Level Meter: Indicates the level of the received audio signal (AF level) from the transmitter in dB.
RF Level Meter: Indicates the strength of the transmitter RF signal in dB.
Close Button: Closes the Programmer Guide.
Locate Button: Locates the stationary AKG Device which is dedicated to the non-stationary device.
Previous Button: Switches to the previous non-stationary.
Next Button: Switches to the next non-stationary.
If the user has programmed the right frequency at the DHT/DPT700 V1/V2 the background of the page turns into green.