Input Delay
JBL DrivePack^®

The Input Delay panel can be accessed by double-clicking on the DELAY button control in the Input Panel. 

The settings contained within this panel can be copied by selecting the DELAY button and performing a copy using the CTRL-C command or by using the Edit -> Copy command on the Operator Advanced control panel menu. The copied setting can then be pasted to another device by opening the Operator Advanced control panel for the target device and selecting the DELAY button and performing a paste using the CTRL-V command or by using the Edit -> Paste command on the Operator Advanced control panel menu.

Users can delay input signals to desired levels using this function. The user can modify the delay parameters in seconds, feet or meters increments. The default delay parameter is 0 seconds, 0 feet, 0 meters.

Delay Controls

The user can modify the Input Delay behavior by modifying a delay parameter. When one (1) delay parameter is set the others will be automatically modified to represent the delay in their units.

• Seconds – Input signal delay in seconds. Maximum delay is 2.0 seconds.

• Feet – Input signal delay in feet in normal air propagation. Maximum delay is 2255 feet.

• Meters – Input signal delay in meters in normal air propagation. Maximum delay is 687.3 meters.