Parameter Presets: See configuring Parameter Presets HERE.
Remove Assignment: Clicking this button removes the selected Parameter Assignment.
INPUT
Direct Action: Performs the action defined in the Parameter Assignment.
Direct Action (Inverted): Performs an inverted or opposite of the action defined in the Parameter Assigment. For example, if a "Mute" function is assigned, an "Un-mute" action will be performed.
Toggle Action: Performs the action as if the switch was a toggle switch.
Multi-State: For triggering Multi-state functions such as a Source Selector etc. See 2-Wire mode for an example.
OUTPUT
Normal (Control or LED in the ON state, causing the logic port to go High, +5v)
Inverted (Control or LED in the ON state, causing the logic port to go Low, 0v)
BLU Control Inputs, Logic Outputs, Opto Output
These are the physical Inputs and Outputs of the Control Port. As you can see, there are 12 Control Inputs, 6 Logic Outputs,
