At the Add Offline Devices tab page the user can add and configure offline AKG Devices at offline HUB4000 Qs.
To add offline AKG Devices to an offline HUB4000 Q the user must set the Device Type and the Band Variant for an offline AKG Device at an empty Slot of the HUB4000 Q. With the RESET ROW SETTINGS Button the settings of a row can be discarded.
As long as at least one grid rows is not fully filled out and the APPLY OFFLINE DEVICE(S) Button is not pressed the offline AKG Devices will not be added and applied to the dedicated HUB4000 Q.
So first the grid row must be filled out. Following parameters must be set:
Select the grid Row of the slot of an offline HUB4000 Q
The Device Type of the AKG Device (DSR700, SR4000/4500, SST 4/4500).
The Band Variant of the AKG Device.
After all these parameters are set, the offline AKG Devices is configured and can be added or applied to the wireless system with the APPLY CHANGES Button. All slots which cannot be configured are not enabled.
Figure: Device Manager - Add Offline Devices Grid
Add Offline Devices Grid:
HUB4000 Q: Address and name of the HUB4000 Q the offline AKG Device should be dedicated to (can’t be changed within the grid).
Slot: Slot number of the HUB4000 Q to which the offline AKG Device should be dedicated (can’t be changed within the grid).
Type: AKG Device Type e.g. DSR700 V1/V2, SR4000/4500, SST4/4500… of the offline AKG Device to add. With a click in the cell the user can select the Device Type from a drop down list box.
Band: Frequency Band of the AKG Device. With a click in the cell the user can select the Band Variant of the AKG Device from a drop down list box.
Delete offline device Button: Discards the settings of the grid row.
Apply changes Button: If this button is pressed then offline AKG Devices are added to the selected HUB4000 Qs. If there are any AKG Devices configured improperly, a message box with an error message will pop up.