Offline Stripes exist only at the HUB4000 Q System Architect plug-in.
These offline Stripes have NO physical representation and NO physical AKG Device is connected to the dedicated slot of the hardware HUB4000 Q. Offline Stripes can exist in both online and offline HUB4000 Qs.
Offline HUB4000 Q:
At an offline HUB4000 Q all Stripes are offline because the offline HUB4000 Q has no connection to the HiQnet network.
Online HUB4000 Q:
There are three possible states of a Stripe at the System Architect plug-in if the dedicated HUB4000 Q is online:
Online Stripe which has a physical AKG Device connected to the dedicated slot at the Online HUB4000 Q which matches exactly.
Figure: Online AKG Device = Online AKG Stripe
Offline Stripe which has NO physical AKG Device connected to the dedicated slot at the Online HUB4000 Q.
Figure: Offline AKG Device = Offline Stripe
Mismatching Stripe if the offline Stripe is NOT matching with the physical AKG Device (Mismatch). This can only happen if there is a physical AKG Device connected to the same slot at the online HUB4000 Q.
Figure: Mismatching (red) Stripe: Offline AKG Device IS NOT MATCHING with physical AKG Device
Examples of states of a Stripe of an online HUB4000 Q:
|
|
Hardware configuration |
System Architect plug-in configuration |
Details |
State of Stripe |
|
1 |
Slot 1: SR4000 - Band Variant II |
Slot 1: SR4000 - Band Variant II |
same slot, same device type, same Band Variant |
Online Stripe |
|
2 |
Slot 1: no AKG Device connected |
Slot 1: SR4000 - Band Variant V |
Stripe is offline at SA |
Offline Stripe |
|
3 |
Slot 1: SR4000 - Band Variant IV |
Slot 1: SR4000 - Band Variant II |
same slot, same device type, different Band Variant |
Mismatching Stripe |
Online Stripe: At the physical HUB4000 Q a SR4000 with Band Variant II is connected to slot 1. At the System Architect plug-in of this HUB4000 Q at slot 1 there is configured a SR4000 Band Variant II. Because the slot (1), the device type (SR4000) and the Band Variant (II) are equal at the plug-in Stripe and the physical AKG Device, the Stripe at the System Architect is ONLINE.
Offline Stripe: At the physical HUB4000 Q there is NO physical AKG Device connected to slot 1. Due to that reason the plug-in Stripe (SR4000 Band Variant V) shown in slot 1 is OFFLINE.
Mismatching Stripe: At the physical HUB4000 Q a SR4000 Band Variant IV is connected to slot 1. At the System Architect plug-in of this HUB4000 Q at slot 1 there is configured a SR4000 Band Variant II. The slot (1) and the device type (SR4000) are equal at the plug-in Stripe and the physical AKG Device. But the Band Variant is different (Band Variant II vs. IV) the Stripe at the System Architect is MISMATCHING with the physical AKG Device.